Dr. Dabber Switch Vaporizer
The Dr Dabber Switch is the first ever induction heated e-nail. There is no need for torches and timers with the Switch, it is easier to use and it is more convenient in comparison to traditional dabbing methods. The Switch is thought to be the next generation of vaporizers.
This vaporizer uses induction heating technology, which is a faster and efficient way to heat your dry herb or concentrates. It creates an even heating surface temperature with fewer hot-spots, which results in a purer flavor throughout the session.
Powerful & Smart
Whether it’s particularly dense flower or very viscous oil, the SWITCH has 25 carefully calibrated heat settings to handle any situation. These 25 heat settings aren’t just a selling feature…there is method to our madness. If you want an emphasis on flavor, there is a setting for that. If you prefer superior vapor density, there’s a setting for that too. If you want to crank it up for a cloudy experience, no problem. Running out of material at home and want to use a smaller amount than you normally do? Just turn it down a couple notches. The SWITCH is designed by people who understand that no two hits are the same, just like no two flowers or oils are the same. The SWITCH’s versatility is simply astounding.
A Battery Built for Real Life
The SWITCH is capable of up to 150 uses on a single charge. These are not laboratory numbers, this is real life. For the average user, this means well over a week of use on a single charge. Add to that the convenience of pass-through charging, and you can choose to use the SWITCH whichever way fits your life. This kind of efficiency and versatility in a device as powerful as the SWITCH is simply unheard of. Taking into account that a full charge takes only 60 minutes, it’s safe to say the SWITCH is in a league of its own.
The Power & Speed of Induction
The patent-pending induction heating technology inside allows the device to heat to target temperature in an incredibly short amount of time. We’re talking an average of 4 seconds (depending on selected temperature). This sort of speed is simply not possible with traditional convection and conduction vaporizers. On top of that, the induction heating setup allows for the electronics to be completely sealed off from the heating element, meaning absolutely no possibility of mechanical failure due to leakage. You can literally pour water into the heating element of the SWITCH and press the button and it would simply bring the water inside the dish to a boil. The SWITCH is NOT like other vaporizers.
Customization & versatility
Dr. Dabber Switch lets the consumer go from vaping waxes to herbs like the flip of a switch. There’s a black ceramic induction cup for finely ground up herbs and a white ceramic induction cup for oil. Also, 25 advanced settings allow you to customize your vape experience, depending on your mood. Not every session meant to be the same, which is why Dr. Dabber created this device. Part of the customization and versatility of the vaporizer lets you interchange the glass attachments and use it as a desktop vape or portably.
Useful built-in features
Designed with a self-cleaning mode, Dr. Dabber Switch dissipates any excess residue remaining in the induction cups with heat, 800°F (427°C) to be exact. Also, the vaporizer has an automatic cool-down feature that kicks in once your session ends. The LED lights will change to blue, indicating the device is cooling down. This feature preserves and extends the life of the product.
Induction heating technology
Rather than using convection or conduction technology, Dr. Dabber Switch utilizes advanced technology with induction heating. This leverages the power of magnetic energy to create heat at precise temperatures ranging from 300°F (149°C) to 800°F (427°C). The high level of precision keeps flavors consistent with every use. Additionally, this type of setup heats the vaporizer in as little as four to five seconds.
Long-lasting battery life
First of all, the battery achieves a full charge in one hour; this is a reasonably short charging time considering that it can last up to 150 uses when used in a low heat setting. If using a medium or high heat setting, you may get fewer usage before the battery needs recharging. However, Dr. Dapper Switch has a pass-through charging mechanism that allows you to charge the vaporizer while using it at the same time. Therefore, you can have unlimited vaping sessions when the device is plugged in. Whereas, you can have a lot of sessions for days alone or hours with a group of people when using concentrates.
How to Use the Switch
For Dry Herb
- Flip the power switch to leaf mode.
- Place a few ounces of water in the glass bubbler and then attach it to the top of the unit.
- Choose your power setting using the plus and minus buttons.
- Firmly pack one of the ceramic nails with your dry herb and place it in the glass top of the unit using the tweezers.
- Cover the ceramic nail with the ceramic flower filter and press the Go button.
- Inhale from the mouthpiece once the desired power setting is reached.
- Flip the power switch to the oil setting.
- Fill the glass bubbler with a few ounces of water then securely attach it to the glass top of the unit.
- Use the plus and minus buttons to choose your desired power settings
- Place one of the ceramic nails within the glass top using the included tweezers.
- Scoop up a rice grain sized amount of wax using the dab tool then press the Go button to start the heating process.
- Dab the wax into the nail, cover it with the dab tool, and inhale from the mouthpiece.
This vaporizer is 9.5″ tall without the bubbler, with the bubbler the Switch is 13″ tall. It is still a sleek and discreet vaporizer and the hourglass design makes it comfortable to hold. All the pieces of the Switch snap together neatly and it is a simple process to assemble.
Induction heating is faster than other heating methods, while still reaching the perfect, wax-friendly high temperatures. The temperature range of the Switch is 300°F – 800°F. Also with this method, it also means you never have to worry about replacing the coil or other heating elements.
The Switch uses induction heating which is different from conduction or convection heating. It uses an electromagnetic coil to heat the wax or dry herb. With this method, the coil is heated from the inside out rather than the outside in.